Decompiler Installshield Error |WORK|

I want the setup.rul file of one of the installshield exe that we have which was made using InstallShield 2012 I believe but I am unable to find any way on how to reverse engineer an InstallScript project from the installation media files i.e. its exe and get the setup.rul files which has the installscript code written in it.

Decompiler Installshield Error

[3] If the script isSetup. RebootIt indicates that the version is relatively high, which is produced by 6.x and 7.x. This is basically used now. You can use InstallShield decompiler and InstallShield 6/7 script decompiler to decompile the source code. InstallShield decompiler is a DOS window, which can be output to view the source code. InstallShield 6/7 script decompiler is a graphical interface and can edit the operator. However, it does not support Chinese characters well.

ThereforeSetup. RebootIn general, we first use InstallShield decompiler to export the script source code, get the correct Chinese information, and write down the offset address and machine code. Run InstallShield 6/7 script decompiler to open the script file and compile and modify the file according to the obtained offset address.

Then, find sensitive information such as "serial number error" in the TXT file. You can see the offset address before, and write it down to InstallShield 6/7 script decompiler to modify the script. Now there is no example to explain, it's boring.

Orca.exe is a database table editor for creating and editing Windows Installer packages and merge modules. The tool provides a graphical interface for validation, highlighting the particular entries where validation errors or warnings occur.

Actua Golf 2, Andretti Racing, Bio F.R.E.A.K.S - all have autoruns. If I start the installer from an autorun - I get this error message with and without your wrapperI have attached the Actua Golf 2 autorun and setup.exe for testing. But it looks like the replacement mechanism works only if you start a setup.exe from the explorer.

RegDrop is a component registration utility that allows you to simply drag and drop acomponent on it and RegDrop will register or unregister the component for you. Thisprocess is much easier than having to locate the REGSVR32 console application to registercomponents. And more important, RegDrop gives real error messages as opposed to crypticnumeric result codes. This is very helpful in debugging self-registration problems in thefiles you are installing.

.. or if ya in the mood for compiling the NSIS have a look into nsis-3.xx-src\Source\exehead\fileform.h. Mixing up the order of the enum with all the EW_* a little bit as recommend in the Comment. It will mess up decompilers output that expect these tokes to be in the standard order.

The changes you perform in the GUI will be automatically reflected in all the related tables from the MSI. This will save you time from manually editing each MSI table and decrease the chance of human error.

Windows 10 users have reported that they're experiencing a strange error when trying to open an application. The message pop-up says that the "side-by-side configuration is incorrect," and fails to proceed with the application's launch.

If you want to determine in more detail what is different between two MSI files (for example version 1 and 2 of a package), you can get a little more involved using a proper MSI file viewer or MSI decompiler.

This adjusts the allowable memory for Java to 512 Mb. The setting change takes effect immediately, so relaunch your Java app and see if the error still appears. If it does, repeat the process above but increase the memory to 1024 Mb by setting the value to -Xmx1024M instead.

Sometimes virtual machine errors can be caused by the lack of appropriate admin rights on your Windows PC. To see if this is the issue, set up the Java app on your PC to run as the system administrator.

• We were looking for a MSI wrapper that would meet top restrictive enterprise requirements for a large customer: The MSI package will report completion only when the internal setup exe installation process truly completes.

• The MSI package will return error codes returned by the internal setup exe file.

• Works on XP and above, 32bit and 64bit architectures.

Using MSI packagers (that re-create native MSI setup kit) was not an option (due to very complex installation scripts we have), so we had to test all the MSI wrapper tools we could put our hands on. We tested a few MSI wrappers, and the only MSI wrapper that met those requirements was MSI Wrapper from EXEMSI, and by that it saved us from working a few months re-writing the whole installation script with a new setup builder tool that creates native MSI files, not to mention the cost of the other setup builder tool.Oren Keinan, VP of R&D, Kryon Systems

When a file is passed to UniExtract, it begins by scanning the file with TrID. If the file format matches one of the supported non-executable formats listed below, it immediately begins extraction from the archive. If it's an executable file, it calls PEiD to analyze the file signature. If the signature indicates that it's a supported format, then it attempts to begin extraction. If it is not a recognized signature, it will try running it through 7-Zip and UnZip as default cases. If 7-Zip or UnZip recognizes it, it will be extracted; otherwise, UniExtract displays an error message and exits.

If the filetype is supported, UniExtract begins by checking for a valid destination directory and recording the directory size. If necessary, a new directory will be created (with a directory size of zero). UniExtract then spawns a shell and calls the supporting binary to begin extracting files from the selected archive to the destination directory. After completion, UniExtract checks the size and timestamp of the subdirectory to determine if extraction was successful; if the size or timestamp is greater than the initial values, UniExtract assumes success and exits. If extraction fails, UniExtract notifies the user and leaves a log file (uniextract.log) that (should) contain any error messages.

The uniextract.log file is created during the extraction process by the tee program. Essentially, all output from the running binary is redirected to tee, which in turn writes the output to the log file as well as echo it to the screen to give the user current progress. Upon successful execution this file is deleted, but if an error is detected it is left alone for the user to review. Note: As of v1.4, the location of uniextract.log can be changed to any user-specified directory.

This last string is most interesting because we know valid CD-keys always contain a dash between a front 4 digits and rear 4 digits. We can check what code references this string: the instruction at address 0x10001012. Looking at the decompiler window, the instruction forms part of an IF statement, part of a function that contain returns with some of the other strings; highly likely this is the validation function.

IDA Pro is the industry standard platform for software reverse engineering. It is also very expensive. Currently, a the Starter Edition of IDA (which can only process 32 bit files) for one named user, along with the X86 Hex-Rays decompiler costs about $2,700. If you want to be able to decompile x86 AMD64 files, the cost is about $4,400 for IDA Pro, x86, and x64 compilers for one named user. Fortunately, a couple open source alternatives exist.

Visual Studio now has audio cues available to associate sounds with common activities. When enabled, Visual Studio will play a sound when the caret in the editor arrives on a line with a break, warning or error. It will also play a sound when the caret arrives on a line that has been added or deleted when viewing a file in a diff view.

Released way too soon.My fans spin up every 5 minutes due to high processor usage (which it did not do on 17.3).It puts red squiglies in commented out code but the error window is empty.Navigating back and forth brings me to all sorts of places but not the ones I was before.Get your act together.

Really simple to reproduce, create a new library, set TargetFramework to net48 (or any net4xx), add nuget xunit and xunit.runner.visualstudio, create an empty test and run it.Or create a .NET 6 xUnit library and revert TargetFramework to net48 (with latest to avoid the compile errors).

Hello, update to17.4.1,Connecting to hololen2 through USB, the deployment of the previous uwp(c#) project encountered DEP6701: startup failure, with the following unexpected error: the method or operation was not implemented.

I'm using the Flash Player 11.2.202.228 because the newest version 11.4 crashes too much. Also, the newest Flash Player plugin 11.4 installer does not come with a separate installer for the ActiveX plugin, but the 11.2.202.228 Flash Player plugin does come with a separate installer for the ActiveX plugin, but it gives me this error message.

But also seen in my screenshot, the ActiveX installer file named "flashplayer11_2r202_228winax_32.msi" will not install and it gives me the error message in the following screenshot below.

But when I try to install the ActiveX plugin with the .exe file I get another error message, shown in my screenshot below telling me that the Flash Player that I'm trying to install is not the most current version. But it isn't the Flash Player plugin that I'm trying to install, it is the ActiveX plugin with the ActiveX installer that I'm trying to install.

I swear, Adobe has more erroneous error messages than Microsoft, or they are at least neck and neck right now. It seems that Adobe could at least get the difference straight between their own Flash plugin installer files and error messages and their ActiveX plugin installer files and error messages.